Overview Quick Details
Supply Ability
Packaging & Delivery
Online Customization
Product Description
5x8mm CNC Motor Shaft Coupler 5mm to 8mm Flexible Coupling
Product DescriptionMaterial: Aluminum alloy, therefore extra flexible with low bearing loads and lightweight for low inertiaProduct Type: Clamp beam couplingDimensions: large Bore: 8mm(5/16 inch), Small Bore: 5mm(13/64 inch), Outer Diameter: 20mm(25/32 inch), length: 25mm(63/64 inch)Cap Screw: M3Nuber of Screws: 2 eaAngular Misalignment: ≤ 2°Parallel Misalignment: +0.20mm/-0.20mmRated Torque: 0.5NmMaximum Torque: 1.0NmMaximun Rotatonal Speed: 19000RPMApplication: It is one-piece metallic flexible coupling for step motor connect, servo applications and also the most common applications are attaching encoders to shafts and motion control for robotics.NotesNote 1: Performance ratings are for guidance only. The user must determine suitability for a particular applicationNote 2: Coupling torque and torsional stiffness are determined by the largest bore selected.Note 3: Torque ratings for the couplings are based on the physical limitations/failure point of the machined beams.In some cases, especially when the smallest standard bores are used or where shafts are undersized, slippage on the shaft is possible below the rated torque of the machined beams.Product Dimensions: 1.2×1×1 inches, 2.1 ouncesPackage Dimensions: 5×4×3 inches, 4.5 ounces
Our companyPacking & Delivery