Consisting of the stress balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is intended to operate materials handling tools. The decreasing movement is achived by the solenoid valve with all the decreasing velocity controlled by an adjustable needle valve. The left and ideal functions are equipped using a dual pilot operated test valve and cross-over relief valves.
Remark: Please seek advice from our income engineer to the unique pump displacement, motor power or tank capability.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean the many hydraulic elements concerned prior to installation of the energy unit.
three. Viscosity of the hydraulic oil shoud be 15~46 cst, which must also be clean and totally free of impurities.N46 hydraulic oil is advised.
four. This electrical power unit ought to be mounted horizontal.
5. Check the oil degree inside the tank right after the primary commence of the power unit.
6. Oil changing is required immediately after the original a hundred operation hrs, afterwards the moment just about every 3000 hours.